454 Mag cam
#1
Registered
Thread Starter
Join Date: Mar 2009
Location: Merritt Island FL
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
454 Mag cam
Have a base 310 or 330 454 in a 22 foot Powerquest. looking at sliding in a 454 Mag roller cam 224@50 & 483 lift. Any power to be had with that change. Using aluminum intake.
#2
VIP Member
VIP Member
Yes, that is worth 20-30 HP...
If you have a Gen VI roller cam 310HP to start, it will be an easy swap.
Putting a Gen VI cam into a Gen IV or Gen V 330HP will require a different timing set and cover, aswell as lifters at min.
If you have a Gen VI roller cam 310HP to start, it will be an easy swap.
Putting a Gen VI cam into a Gen IV or Gen V 330HP will require a different timing set and cover, aswell as lifters at min.
__________________
Patrick
Patrick