Under Hatch Mirror,What backing do I need?
04-23-2009, 01:47 PM
#1
VIP Member
Under Hatch Mirror,What backing do I need?
I am trying to put the plastic mirrors on the bottom of my hatch,what backing would work to glue it to?
Also the mirror will be curved,and some glues will pop loose makeing it fit the curved hatch,unless I simulate the bend while gluing it.
Hustler recommends starboard with contact cement and let it get tacky and stick the two together.
I also was told use a plastic laminate adhesive?
Any experience or suggestions appreciated.
Rob
Also the mirror will be curved,and some glues will pop loose makeing it fit the curved hatch,unless I simulate the bend while gluing it.
Hustler recommends starboard with contact cement and let it get tacky and stick the two together.
I also was told use a plastic laminate adhesive?
Any experience or suggestions appreciated.
Rob
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
04-23-2009, 04:21 PM
#2
I always wondered that. I was going to do mine at one time but couldnt come up with a good solution. I even thought of that heavy duty velcro tape like that comes with your speedpass.
04-24-2009, 10:10 AM
#7
I have a locall plastics products biz in town,im figuring around 100.2 pices 32x68
Ive seen on other mirror thread there is other places that handle it mail order.
Ive seen on other mirror thread there is other places that handle it mail order.
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
Platinum Member
