Where to get manifolds
#1
Registered
Platinum Member
Thread Starter
Where to get manifolds
Saw a while back there where some replacement manifolds that replaced the stock BBC iron manifolds on ebay. They were aluminum, but fit in the same hole. Anyone seend these lately. I can't find either those or the stock iron ones on there anymore. They were new stock.
Need some for my 502's
Need some for my 502's
#5
Registered
Join Date: Jan 2008
Location: Greensburg, IN
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
I think this was the more prominent seller on ebay of GLM manifolds.
[email protected]
But I like you haven't seen him around for awhile. I got a stock manifold from him. Great to deal with.
Unfortunately I just sold 2, maybe 4(to the same person) on ebay yesterday.
Bad timing i guess.
[email protected]
But I like you haven't seen him around for awhile. I got a stock manifold from him. Great to deal with.
Unfortunately I just sold 2, maybe 4(to the same person) on ebay yesterday.
Bad timing i guess.
#6
Registered
Join Date: Apr 2009
Location: Mullica Hill, NJ
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
I am looking for the same thing.. the stock exhaust manifolds on my 502 efi just went.. What do you guys suggest in getting? i seen the glm ones somewhere for $689 shipped with all the parts
#7
Registered
Platinum Member
Thread Starter
http://www.keitheickert.com/detail.aspx?ID=8763
#8
VIP Member
VIP Member
I am going to get some of these I think. A little better than stock. I'll PM you who to talk to over there.
http://www.keitheickert.com/detail.aspx?ID=8763
http://www.keitheickert.com/detail.aspx?ID=8763
Those are the GLMs that Dennis Moore sells or used to sell.
I put a set on a small block and they were great.
__________________
Patrick
Patrick
#9
Registered
Yup,the "Hardin SS" are nothing more than GLMs.
One with less than 10 hours on my boat started leaking internally and I ended up bending a rod.
GLM replaced the manifold but not the engine which took me a year to save up for to rebuild..
I did a web search and found its not uncommon for this to occur
with these chinese made gems .
One with less than 10 hours on my boat started leaking internally and I ended up bending a rod.
GLM replaced the manifold but not the engine which took me a year to save up for to rebuild..
I did a web search and found its not uncommon for this to occur
with these chinese made gems .