Scan tool needed
07-18-2009, 07:45 PM
#1
Registered
Thread Starter
Join Date: Jul 2009
Location: Indiana
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
Scan tool needed
HI- We are looking for a scan tool than can give us the run down of how our engines were run prior to us. Is this possible? My husband says he thinks it is but wanted to see if there is anyone in our area that would be interested in taking a look for us? The boat is an 03 sonic 31ss with twin 575sci's. Thanks in advance...
BTW, we are located in South Bend, IN.
Amy
BTW, we are located in South Bend, IN.
Amy
07-18-2009, 09:25 PM
#2
Registered
Join Date: Mar 2009
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
If you have no luck finding some one with a scaner tool, Then really it would be a good idea to own one for your self, Here is a link to rinda, The hand held black box scaner would work good for you.You can call them to order if you want to. Then all you would need is a service manual to your engine some day. Good luck with it.http://www.rinda.com/marine/marine.htm
07-19-2009, 12:14 AM
#4
Charter Member # 55
Charter Member
Shouldn't this have been done before you bought it?????
Any merc repair facility should be able to scan them for about an hour labor. They can tell you what rpms they have been ran at and for how long.
Any merc repair facility should be able to scan them for about an hour labor. They can tell you what rpms they have been ran at and for how long.
