rssteiny

Where can i get the hydraulic hoses for my marine machine external steering, i had 1 made local and the fittings are not stainless and they rust and look like crap. marine machine web site does not have the hoses.

Thanks

jdub

iTrader: (1)

pm "Jb-fse" here on OSO. He can get whatever you need at a great price. I have dealt with him a few times and was very pleased.

jdub

iTrader: (1)

or Kirk can hook you up

monstaaa

the hose is hi pressure hydraulic hose. with reusable ends. the come in stainless or chrome/ nickel plated. you'll need the mandrel to install the ends. and tape and a new disc on a cut off wheel if you dont have access to a chop saw. clean thoroughly and install. use a good lube when installing the ends. the hose size is -6 and the ends are most like ly -6 j.i.c . maybe s.a.e .

AO31

My latham were SAE and if you only need four I would recommend just buying them assembled rather than buying the mandrel and messing around with all that stuff.

32storm

Hardin Marine in FL has pre-made braided stainless steel. Check their website.

Pokher Ace

Whats the best oil to put back in them when done? Hydraulic oil or steer fluid?