anyone got a 731 cam they want to get rid of
#1
Registered
Thread Starter
Join Date: Jul 2009
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
anyone got a 731 cam they want to get rid of
Im considering running the 731 cam but being that you cant buy them anymore just curious if anyone has one they want to get rid of
does not matter if its used as long as its in good shape
pm me if you do
thanks
does not matter if its used as long as its in good shape
pm me if you do
thanks
#2
Registered
Join Date: Jul 2008
Location: Darwin, Australia
Posts: 730
Likes: 0
Received 0 Likes
on
0 Posts
Crower makes a similar cam, PN 01404LM (LM is step nose)
Specs are: Adv Dur I:292° E:303°, Dur @.50 236°I, 245°E.
Lift: .586" Intake, .612" Exhaust with 110° LSA
The 731 was: Lift: .587''/.610''
Duration: 288°/298° with 114° LSA
At least they are available!
Specs are: Adv Dur I:292° E:303°, Dur @.50 236°I, 245°E.
Lift: .586" Intake, .612" Exhaust with 110° LSA
The 731 was: Lift: .587''/.610''
Duration: 288°/298° with 114° LSA
At least they are available!
Last edited by Ghostrider; 07-31-2009 at 03:03 AM.
#3
Registered
Thread Starter
Join Date: Jul 2009
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
I dont think on a 110 LSA though that it will work as good as the 731 cam that is supposed to be on a 112 lSA I believe
is anyone running this Crower cam ?
any problems with reversion on a 110 LSA ?
#4
SORE MEMBER
Platinum Member
Join Date: Apr 2004
Location: 29°50'49.74"N 95° 5'17.55"W.......TEXAS
Posts: 6,989
Likes: 0
Received 1 Like
on
1 Post
This is where ultradyne cams ended up. I am sure he can make you exactly what you want.
Ive been running his cams for 20 years in jet boats and offshore boats.
Ask for Harold Brookshire
http://www.bulletcams.com/
Ive been running his cams for 20 years in jet boats and offshore boats.
Ask for Harold Brookshire
http://www.bulletcams.com/
Last edited by Wobble; 07-31-2009 at 12:16 PM.
#5
Registered
Thread Starter
Join Date: Jul 2009
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
This is where ultradyne cams ended up. I am sure he can make you exactly what you want.
Ive been running his cams for 20 years in jet boats and offshore boats.
Ask for Harold Brookshire
http://www.bulletcams.com/
Ive been running his cams for 20 years in jet boats and offshore boats.
Ask for Harold Brookshire
http://www.bulletcams.com/
Im hoping to maybe find something used
if I end up going with a custom cam it will be from RMBuilder
I already spoke with him
but if I can pick up a used 731 for a little a good price im going to go that route instead,
Im not looking for all out peformance I just want something that is going to make decent power
#7
Registered
Thread Starter
Join Date: Jul 2009
Posts: 264
Likes: 0
Received 0 Likes
on
0 Posts
168731 looks to be a Gen V or Gen VI block
they year the block is supposed to be is a 2001
pm me if you got anything or email me at [email protected]
thanks
they year the block is supposed to be is a 2001
pm me if you got anything or email me at [email protected]
thanks
#9
Registered
Call Bob Madera on here. I swapped one of his cams in my engine over the 731 I was running and now I can't keep an outdrive together!
Be careful what you wish for!!
Be careful what you wish for!!