700 sci recalibration
#1
Registered
Thread Starter
Join Date: Jun 2005
Location: IL
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
700 sci recalibration
Curious if anyone out there is running whipples stage one or 2 on there 700 merc. I have heard through the grape vine that there was some issues with them and was trying to find out the truth. If you are running a 700 with the upgrades let me know your honest truth.
#2
Chris
Gold Member
Tim at Oregon Custom Marine is running a stage II whipple kit on his 700sci in his Nordic Thor.
Took the boat from aproximately 110 mph to 120+ mph.
He has quite a few hours on the motor since the upgrade, and has had no issues.
I have had a Stage II on my 600sci for this entire boating season.... and it runs great!
Dustin at Whipple is awsome to work with, and I would highly recommend this upgrade.
Hope this helps,
Chris
Took the boat from aproximately 110 mph to 120+ mph.
He has quite a few hours on the motor since the upgrade, and has had no issues.
I have had a Stage II on my 600sci for this entire boating season.... and it runs great!
Dustin at Whipple is awsome to work with, and I would highly recommend this upgrade.
Hope this helps,
Chris
Last edited by CB-BLR; 11-02-2009 at 12:37 PM.
#3
Registered
http://www.offshoreonly.com/forums/g...00s-sci-2.html
The guy that posted bbaur32 did the upgrade. I talked to him on the phone for awhile and he has had no issues. pm or call him...super nice guy.
The guy that posted bbaur32 did the upgrade. I talked to him on the phone for awhile and he has had no issues. pm or call him...super nice guy.
#4
Registered
Thread Starter
Join Date: Jun 2005
Location: IL
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
I have heard good things about the 600 but I have been around some 700's that did not run well with the recal. They ran hard for the test for the magazines but not an all day relax ride. I need some sort of reliability.