Water hose connection help (serpentine) 454 / 502 mag
#1
Registered
Thread Starter
Join Date: Jun 2007
Location: Texas
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
Water hose connection help (serpentine) 454 / 502 mag
Can some one look at their engine or service manual and tell me if the fresh water hose from the drive connects to the top nipple on the sea pump or the bottom.
Thanks in advance Mitch
Thanks in advance Mitch
#4
Registered
Thread Starter
Join Date: Jun 2007
Location: Texas
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
This was a picture from the dyno. When I looked at it magnified, it looked like the water in was hooked to the bottom. The hosed were not connected when I got it.
#6
Registered
Join Date: Mar 2009
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
Also when you go to start the engine just have your hand on the impeller housing, If it starts getting warm you have the hoses hooked up wrong, If it stays cool then you are ok, You will know within 15 seconds if you got it right or not by feeling it.