Bbc Brodix Bp Bb-2xtra 355 Cnc In Need Of Valves!
#1
Registered
Thread Starter
Join Date: Nov 2009
Location: Downey,CA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Bbc Brodix Bp Bb-2xtra 355 Cnc In Need Of Valves!
I just purchased a set of Bare heads I would like to know the part # of the intake valves and Exhaust. MANLEY VALVES
Severe duty on the intake and inconel on the exhaust???
can anyone guide me in the right direction are the valves standard on this set up.
Thanks in advanced for everyone helping me.
Severe duty on the intake and inconel on the exhaust???
can anyone guide me in the right direction are the valves standard on this set up.
Thanks in advanced for everyone helping me.
#2
Registered
Join Date: Jan 2004
Location: San Diego, California
Posts: 2,777
Likes: 0
Received 6 Likes
on
6 Posts
Manley has a sales and technical office in the LA area. They can give you cat #s and where to go to get them.
You can also contact SI Valves in Simi Valley or contact Ferrea or Rev Valves in Florida.
All these companies can give you the good valves you need most likely right off the shelf. Good Luck in your search.
Best Regards,
Ray @ Raylar
You can also contact SI Valves in Simi Valley or contact Ferrea or Rev Valves in Florida.
All these companies can give you the good valves you need most likely right off the shelf. Good Luck in your search.
Best Regards,
Ray @ Raylar