Fuel Supply for GEN5 block, after market?
02-18-2010, 09:37 AM
#1
Charter Member
Charter MemberThread Starter
Join Date: Oct 2000
Location: richmond virginia
Posts: 1,353
Likes: 0
Received 0 Likes
on
0 Posts
Fuel Supply for GEN5 block, after market?
I have a gen5 block and running an electric pump but I would like to get away from it, should I just get the Merc waterpump to run a mechanical pump or does anyone else make this type of set up, any part numbers would be helpful, 650hp Carb'ed
__________________
"If Things Seem Under Control, You're Not Going Fast Enough"
Mario Andretti
"If Things Seem Under Control, You're Not Going Fast Enough"
Mario Andretti
02-18-2010, 09:47 AM
#2
Registered
iTrader: (2)
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
fixx
[email protected]
02-19-2010, 06:43 AM
#3
Charter Member
Charter MemberThread Starter
Join Date: Oct 2000
Location: richmond virginia
Posts: 1,353
Likes: 0
Received 0 Likes
on
0 Posts
__________________
"If Things Seem Under Control, You're Not Going Fast Enough"
Mario Andretti
"If Things Seem Under Control, You're Not Going Fast Enough"
Mario Andretti
02-19-2010, 11:31 PM
#4
Registered
Just keep in mind that the water pump does not take a standard BBC fuel pump. The arm on the fuel pump that goes into the water pump is different than a BBC. You must use the correct pump. You can change the pump section to get more fuel flow, but you have to use the stock type upper housing. KE (Hardin Marine) makes a nice replacement pump section. Good luck.
Eddie
Eddie
