Alpha One shift problem
#1
Registered
Thread Starter
Join Date: Aug 2010
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Alpha One shift problem
I'm having problem with adjusting the lower unit shift cable for alpha one. I replace the outer & inner cable with no problem. The problem is I have the lower unit in full locked in forward gear and I can not get the brass piece to be 6" from center to center I can only get it to 6.5" b/c it at the end of the treads. So any info will help.
I have a pic that expanded it a little better but cant figure out how to insert here
I have a pic that expanded it a little better but cant figure out how to insert here
#2
Registered
Might want to try over on http://forums.iboats.com/
Lot of Alpha guys over there that can tell what you need to know.
Lot of Alpha guys over there that can tell what you need to know.
#3
Registered
iTrader: (2)
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
Fixx
I'm having problem with adjusting the lower unit shift cable for alpha one. I replace the outer & inner cable with no problem. The problem is I have the lower unit in full locked in forward gear and I can not get the brass piece to be 6" from center to center I can only get it to 6.5" b/c it at the end of the treads. So any info will help.
I have a pic that expanded it a little better but cant figure out how to insert here
I have a pic that expanded it a little better but cant figure out how to insert here
also if you dont have the shift foot lined up under the upper housing(speedo pick up is located ) it will be locked into gear..