Can someone ID this hose?
#1
Registered
Thread Starter
Join Date: Dec 2006
Location: Merritt Island, FL
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
Can someone ID this hose?
Anybody know what the part number/ application this hose would be? It's basically two 90-degree bends, clocked 90 degrees away from eachother. There is about 13" between the hose ends linearly.
They came on my Gen 4 454's with crossovers. It's a perfect fit to go from the crossover down between the alternator and the block, and into the oil cooler.
Thanks! Randy
They came on my Gen 4 454's with crossovers. It's a perfect fit to go from the crossover down between the alternator and the block, and into the oil cooler.
Thanks! Randy
Last edited by bustedbrick; 09-13-2011 at 09:22 PM.
#5
Registered