imco hyd. steering hoses?
#1
Platinum Member
Platinum Member
Thread Starter
Join Date: Feb 2001
Location: poughkeepsie, ny, usa
Posts: 1,198
Likes: 0
Received 0 Likes
on
0 Posts
imco hyd. steering hoses?
put brand new hoses on last year. noticed that there are little pieces of rubber taken out of hose mabe i hit something? is there any way to cover or fill in the missing pieces with something. you can see the braiding hoses under the rubber but that is fine and not leaking.
#4
Registered
iTrader: (4)
Actually you should use Permatex The Right Stuff. I seal everything with that crap; boots, waders, bellows, intakes and valve covers.
I also like Ultrablack
http://www.neverseezproducts.com/gasketmakers.htm
I also like Ultrablack
http://www.neverseezproducts.com/gasketmakers.htm
Last edited by Rookie; 10-31-2010 at 09:47 PM.