Imco Powerflows
#1
Registered
Thread Starter
Join Date: Mar 2009
Location: somewhere between paso & LA
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Imco Powerflows
JUST wondering if anyone can tell me why my powerflows
don't have jumper hoses from the manifold to the risers, and
every other set I see does? new to the outdrive stuff, used
to over transom bassett's , if ya know what I mean!
don't have jumper hoses from the manifold to the risers, and
every other set I see does? new to the outdrive stuff, used
to over transom bassett's , if ya know what I mean!
#2
Registered
Join Date: Nov 2009
Posts: 672
Likes: 0
Received 0 Likes
on
0 Posts
older set maybe open manifould water flows though manifould into risers trough a gasget like water flows throught engine block to the heads paul from england
Last edited by paul buckner; 11-11-2010 at 03:24 PM. Reason: bad spelling
#4
Charter Member # 55
Charter Member
Imco's have a wet joint between the manifold and the riser instead of using a jumper hose.
If there is a hose hooked to the riser bunge, then it is from the bypass on the older 4 hose tstat housings.
Click the link and on the picture and you can see where the water flows through on the gasket.
http://www.imcomarine.com/ca_store/i...roducts_id=806
If there is a hose hooked to the riser bunge, then it is from the bypass on the older 4 hose tstat housings.
Click the link and on the picture and you can see where the water flows through on the gasket.
http://www.imcomarine.com/ca_store/i...roducts_id=806