belt size for 525SC
#1
Registered
Thread Starter
Join Date: Sep 2010
Location: GUADELOUPE islands
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
belt size for 525SC
Hello guys,
I have changed the upper pulley in my 525SC and now the old belt is a little too long, did someone had the same issue, and if yes can you tell me the good size to order and where can i order it also. (because I'm living in a french island, and can not find these US belt)
The original pulley was a 10rib 3.5', and new one is 10rib 3.05'.
Thanks
Franck.
I have changed the upper pulley in my 525SC and now the old belt is a little too long, did someone had the same issue, and if yes can you tell me the good size to order and where can i order it also. (because I'm living in a french island, and can not find these US belt)
The original pulley was a 10rib 3.5', and new one is 10rib 3.05'.
Thanks
Franck.
#2
Charter Member # 55
Charter Member
Is it an original Merc belt or aftermarket that you have now??? If its aftermarket, do you have the part # on the belt????
Both Gates and Napa have them available. I don't have the part numbers anymore, but could figure it out if there is a non merc number on your belt.
Both Gates and Napa have them available. I don't have the part numbers anymore, but could figure it out if there is a non merc number on your belt.