32 dominator port engine
#1
Registered
Thread Starter
Join Date: Oct 2010
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
32 dominator port engine
does any body know if you have to remove the engine to replace the starter on the s port engine. all info would be helpf full. thanks.
Last edited by kevin murphy; 03-02-2011 at 09:26 PM. Reason: sp
#3
Registered
My undedrstanding is that it can be done.....but it ain't easy. Might be less drama to pull the motor. I did both staters and anything else hard to reach down there while they were out just in case. If you're a contortionist (or lucky enough to date one who also happens to be handy with a wrench) have at it...let us know how it goes.