Changing Bravo I drive Oil
#1
Registered
Thread Starter
Changing Bravo I drive Oil
Can anyone tell me how to change the oil in my Bravo I? I know where the screw is behind the prop. I don't know where the other one is and can I fill it back up by pouring the gear lube in the over flow? (Sorry if this is a dumb question, but I'm not too mechanically inclined)
#3
Registered
Join Date: Nov 2001
Location: Pennsylvania
Posts: 3,385
Likes: 0
Received 0 Likes
on
0 Posts
My bravos have the vent screw on the side of the upper case like cm26 said. It also has a dipstick in the top of the upper case. It is of paramount importance that you fill your drive from the bottom drain plug with an appropriate pump. Otherwise you will get air pockets in your drive and a false full reading.
BT
BT
#5
Registered
Join Date: Nov 2001
Location: Pennsylvania
Posts: 3,385
Likes: 0
Received 0 Likes
on
0 Posts
bn... any kmart or walmart with a boat section has them. They are like $8 or so. Just a little hand pump with one end that screws on a lube bottle and an end that screws into the drive. Very common ite.
BT
BT