Ateco 500efi upgrade
#1
Registered
Thread Starter
Join Date: Apr 2005
Location: www.bajaboatowners.com
Posts: 2,957
Likes: 0
Received 1 Like
on
1 Post
Ateco 500efi upgrade
Has anyone tried this 600hp upgrade kit that I've seen in classifieds?
http://www.offshoreonly.com/classifi...o38686-en.html
http://www.offshoreonly.com/classifi...o38686-en.html
#2
Banned
Join Date: Oct 2010
Location: Atlanta, Georgia
Posts: 811
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone tried this 600hp upgrade kit that I've seen in classifieds?
http://www.offshoreonly.com/classifi...o38686-en.html
http://www.offshoreonly.com/classifi...o38686-en.html
Last edited by ElimiNordic; 04-08-2011 at 05:25 AM.
#3
Registered
Join Date: Dec 2001
Location: Rapid City SD
Posts: 809
Likes: 0
Received 0 Likes
on
0 Posts
That's a very nice price for all that is included. I have not heard of anyone using the setup, but that would really wake up a 500. Wish they had that posting last year when I rebuilt mine.
#4
Registered
Without intake work and throttle body replacement, I seriously doubt you are going to see 600 hp. The intake is the limiting factor. The throttle body is not far behind.
Also, certainly not a knock against Ateco, but you can't really succesfully do a cal. for an engine with that many mods and get it 100% without tuning it. You can get it close, but every engine is different, therefore requiring a slightly different tune. It may run fine, but it will not be the best it can be. For this reason, I don't offer any "packages" or do I do any tuning through the mail.
Again, not a knock against Ateco. It's just something that I won't do. I have rarely seen it work out that good. However, it is a pretty good price on the parts.
Eddie
Also, certainly not a knock against Ateco, but you can't really succesfully do a cal. for an engine with that many mods and get it 100% without tuning it. You can get it close, but every engine is different, therefore requiring a slightly different tune. It may run fine, but it will not be the best it can be. For this reason, I don't offer any "packages" or do I do any tuning through the mail.
Again, not a knock against Ateco. It's just something that I won't do. I have rarely seen it work out that good. However, it is a pretty good price on the parts.
Eddie
#5
Registered
Join Date: Oct 2006
Location: Michigan
Posts: 1,449
Likes: 0
Received 0 Likes
on
0 Posts
#6
Registered
Join Date: Apr 2006
Location: Ingleside, IL
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Info
Irishtornado,
The 600 kit in classifieds is for a carb engine. The jetting of the carb will need to be motified, but we can help you with this. We have dyno sheets to substantiate.
Matt
The 600 kit in classifieds is for a carb engine. The jetting of the carb will need to be motified, but we can help you with this. We have dyno sheets to substantiate.
Matt
#7
Registered
Join Date: Oct 2006
Location: Michigan
Posts: 1,449
Likes: 0
Received 0 Likes
on
0 Posts
#10
VIP Member
VIP Member
We're doing something similar ( pro 1 heads, bigger cam,
asm throttle body, ecm mods)
Just got the ecm's back from getting re-tweaked, we try
them on the dyno again tomorrow...we'll see what happens.
Judging by what the air quality is suppose to be like tomorrow,
if we get 575 out of them, we'll probably do cart wheels
asm throttle body, ecm mods)
Just got the ecm's back from getting re-tweaked, we try
them on the dyno again tomorrow...we'll see what happens.
Judging by what the air quality is suppose to be like tomorrow,
if we get 575 out of them, we'll probably do cart wheels