mookster

i have a twin engine trs setup on a 30ft formula. after its up on plane and the k planes are in the fully up position the boat seems to be heavy on the starboard side. the boat being empty except for me 190lbs and some life jackets. whats causing this??
is my trim indicators for my trim off??

soonenough

For what it is worth my 353 does the same thing. Not that it fixes your problem or anything.

Powerquest230

How does it ride if you bring a 190lb friend to ride in the passenger seat?

mookster

its alittle better if i have a passanger about my weight but still not perfect

jmrapp

Do your props both spin the same direction? My 242 does the same thing and I just drag a little tab to get it level.

zzzzzz

I had a 251 Checkmate Convinsor that did that, I went crazy trying to figure out why. Then I found in the engine bay there where 2 round ports to give access to the engine mounts and that side somehow had water in it. I'm unfamilier with your set-up but it's worth a look.

mookster

the problem seemed to be alittle worse when i removed both drives to seal them up. and put them back on the boat