MEFI 1 xdf file
#1
MEFI 1 xdf file
Has anyone modified the .xdf definition file for the MAP/RPM/BPW table to add MAP and RPM rows and columns?
I'd like to do that and see if the MEFI 1 will take the added values and run appropriately.
I'd like to do that and see if the MEFI 1 will take the added values and run appropriately.
#5
Is this for all MEFI 1 controllers or just the early models? There were about 3 renditions if I recall.
If I were to attempt an upload I'm assuming the load would fail and the motor would simply not start correct?
If I were to attempt an upload I'm assuming the load would fail and the motor would simply not start correct?
#6
Registered