best set up
#1
Registered
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Posts: 1,170
Likes: 0
Received 0 Likes
on
0 Posts
best set up
i have a 454 420 hp in donzi 22ft runs in upper 60s would like to see mid to high 70s
what would be the best and most relible blower setup to bolt on dont want to betaking it in to fixed all the time im not very good at wrenching
drive is a trs
what would be the best and most relible blower setup to bolt on dont want to betaking it in to fixed all the time im not very good at wrenching
drive is a trs
#3
Registered
Join Date: Apr 2009
Location: Denmark and hopefully some place nice
Posts: 1,852
Likes: 0
Received 1 Like
on
1 Post
What he said. If you are not into wrenching, forget it. It's a long and bumpy road with many headaches and possible long periods of down time. Don't forget to upgrade your steering, fuel system, cooling system and drive line. If that is not possible, don't increase the power. Big power and upper 70's demands good fuel supply and cooling, full hydraulic steering and a drive that can handle the power, if you don't already have it. You'll need about 525-550 hp to achive your goal if 420 hp puts you in the high 60's.