98 525SC intake and cam
12-16-2011, 02:16 PM
#1
Registered
Thread Starter
98 525SC intake and cam
looking for a intake and factory cam for a 98 525sc ??? thanks Rob [email protected]
12-17-2011, 01:57 AM
#2
Charter Member # 55
Charter Member
The stock cam is a Crane 132561 and a flat tappet. The Crane 134241/ kit #131242 is nearly identical and less expensive.
I very much doubt you would see any difference in power. Either can be ordered from Summit Racing.
The factory Merc intakes are very hard to find by themselves.
I very much doubt you would see any difference in power. Either can be ordered from Summit Racing.
The factory Merc intakes are very hard to find by themselves.
12-17-2011, 07:43 AM
#3
Registered
Thread Starter
thanks Griff..did talk to Bob M. decided to go ahead and upgrade to a roller as the flat tappet cores are pretty much junk now days...and just don't want issues after redoing this engine...bad thing is he was not planning on doing the other one but looks like will have to now...
