b18cls1

you must get the stand height right before you worry about pushrod length, the jessels are a little nicer imho but they both are a good rocker

PROWRENCH

Usually only 3 or 4 seconds at a time, but with no mercy, for years.

GPM

Just something I read, T&D makes both steel and aluminum rockers. Steel has better fatigue strength and stiffness than aluminum, and can absorb more abuse than aluminum over time. What’s more, T&D’s steel rockers are actually lighter than their aluminum rockers.

SkiDoc

iTrader: (4)

Here's several shots of my T&D set up. Eddie spent quite a bit of time getting it right. I went with the aluminum over steel because of the budget. The heads are AFR 357's.

byrideroffshore

let me know if u have problems finding what u need..we have run all and broke all racing. Will be working on custom Steel soon.

KAAMA

iTrader: (1)

Does anyone have any photos of the T&D Steel shaft mounts???

GPM

http://www.tdmach.com/