Hp standard dampner plate rating?
04-21-2012, 08:45 PM
#1
Registered
Thread Starter
Join Date: Oct 2009
Location: Madison, Wisconsin
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
Hp standard dampner plate rating?
I have got an issue here, I am questioning the Hp rating for stock dampner plates. It may be an easy one as I suspect that if I am at the Hp level that cast flywheels won't suffice then I ought to go ahead and replace these two.
However if they can handle 700 or 750 I may just run them. I see that the next step up from stock is 1000 trq ratings. This is where it makes me wonder if the stock might work.
Thanks in advance.
However if they can handle 700 or 750 I may just run them. I see that the next step up from stock is 1000 trq ratings. This is where it makes me wonder if the stock might work.
Thanks in advance.
