Mechanical Trim gauge panel
#1
Registered
Thread Starter
Join Date: May 2006
Location: Huntsville, AL
Posts: 1,628
Likes: 0
Received 0 Likes
on
0 Posts
Mechanical Trim gauge panel
I have the same gauge for my drives, and trim tabs as the one in this picture
does anyone know fi the outer trim bezel will come off? would liek to have it hydro dipped with the rest of the parts, after my new dash is done?
does anyone know fi the outer trim bezel will come off? would liek to have it hydro dipped with the rest of the parts, after my new dash is done?
#2
Registered
Join Date: Apr 2007
Location: Peoria, AZ
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
That looks like a Mercury Racing Trim Panel. The frame has studs that basically assemble the whole thing from behind.
Here is a drawing...
http://www.mercruiserparts.com/Show_...+%284+CABLE%29
Here is a drawing...
http://www.mercruiserparts.com/Show_...+%284+CABLE%29
#3
Registered
Thread Starter
Join Date: May 2006
Location: Huntsville, AL
Posts: 1,628
Likes: 0
Received 0 Likes
on
0 Posts
So it looks pretty complicated to just take off the bezel... have to disaseemble the whole thing.... guess it will stay white.
thanks for the link, very informative. and i may still get ancy and do it.
thanks for the link, very informative. and i may still get ancy and do it.