Imco Hydraulic steering lines and fittings
#1
Registered
Thread Starter
Join Date: Sep 2010
Location: simi valley/lake havasu
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Imco Hydraulic steering lines and fittings
hi
anybody use or have any problems with the imco Hydraulic lines that you make yourself, not the crimped ends
by imco
thanks
anybody use or have any problems with the imco Hydraulic lines that you make yourself, not the crimped ends
by imco
thanks
#2
Registered
iTrader: (1)
I seem to remember a thread about this. A few guys had problems with the ends coming off the lines. The hose was garbage. If you do a search you might find it.
I bought premade external ram lines from them that are good quality. In the past I have also had lines made at a local hardware store that have held up well.
I bought premade external ram lines from them that are good quality. In the past I have also had lines made at a local hardware store that have held up well.
#5
Registered
I was one of the ones who had issues..clusterf@#k....but have worked on imco and hose/fittings looked the same...do NOT like the make yourself ones, far better off having them made at a hose shop...cost no more and far better !!