Cam recomendations
#1
Registered
Thread Starter
Join Date: Nov 2010
Location: PENNSYLVANIA
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Cam recomendations
I have a pair of Gen 4 496 600 hp. Looking to change from solid flat tappets to hyd. roller set up. I can not go by what is in it now because I don't know what is in it. Any suggestions ??
#6
Registered
iTrader: (2)
Join Date: May 2012
Location: Gibraltar, MI
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
It's funny, I asked for 500 horsepower with my build, and he thought that was doable...it dynoed 539, through wet manifolds, NOT dyno headers.
Last edited by BBCLiberator; 03-22-2013 at 08:20 PM.
#9
I echo what the other guys said. I am actually running one of Bob's cams that I bought from BBCLiberator - one of his "spares". You will find Bob to be a wealth of information and willing to spend the time on the phone with you explaining everything and making sure you have your combo right. AND HE IS NOT ANY MORE EXPENSIVE THAN THE OTHER GUY! I learned the hard way that he is the guy you should talk to first instead of screwing around.
#10
Registered
iTrader: (2)
Join Date: May 2012
Location: Gibraltar, MI
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
I echo what the other guys said. I am actually running one of Bob's cams that I bought from BBCLiberator - one of his "spares". You will find Bob to be a wealth of information and willing to spend the time on the phone with you explaining everything and making sure you have your combo right. AND HE IS NOT ANY MORE EXPENSIVE THAN THE OTHER GUY! I learned the hard way that he is the guy you should talk to first instead of screwing around.
EDIT: DONE!
Did you get it together yet?
Last edited by BBCLiberator; 03-22-2013 at 08:18 PM.