Drive oil reservoir swap
#1
Registered
Thread Starter
Drive oil reservoir swap
My 1990 fountain twin has 1 round drive oil reservoir and 1 square reservoir. The old (no longer avail) round reservoir is leaking and I need to replace it. I've found a few different Merc part numbers and it's not clear if the mounting bracket and hardware are included in the "kit". Any one made this swap and have the details/part #'s?
Thx!
Thx!
#3
Registered
Thread Starter
Any idea how old the reservoir is?
#4
Registered
iTrader: (1)
I had the same issue as you do and I got mine here... http://www.ebay.com/itm/OEM-MerCruis...197ec2&vxp=mtr
Alpha and Bravo use the same reservoir, but you might have to turn the nipple in another direction to connect to your hose. It will turn without breaking to 180* from what it is.
Alpha and Bravo use the same reservoir, but you might have to turn the nipple in another direction to connect to your hose. It will turn without breaking to 180* from what it is.
Last edited by pslonaker; 04-23-2014 at 11:48 PM.
#5
Platinum Member
Platinum Member
Not really, but being they are no longer made it must be pretty old...but it doesn't leak. We bought it used to have as a spare but never used it. Guaranteed to not leak... when it delivers.
Last edited by BenPerfected; 04-24-2014 at 02:37 PM.
#6
Registered
Thread Starter
I appreciate the offer, but I think I'll go with a new square one to match the other square one.
#7
Registered
Thread Starter
I had the same issue as you do and I got mine here... http://www.ebay.com/itm/OEM-MerCruis...197ec2&vxp=mtr
Alpha and Bravo use the same reservoir, but you might have to turn the nipple in another direction to connect to your hose. It will turn without breaking to 180* from what it is.
Alpha and Bravo use the same reservoir, but you might have to turn the nipple in another direction to connect to your hose. It will turn without breaking to 180* from what it is.
I also found another one on E-Bay ( http://www.ebay.com/itm/Mercruiser-M...5cc86a&vxp=mtr )
that is a bit cheaper (part# 806193A48). Any idea what the differences are?
The A51 is called a DRIVE LUBE MONITOR.
The A48 is called a LUBE BOTTLE KIT.
#8
Registered
iTrader: (1)
I checked out the link (part# 806193a51 ).
I also found another one on E-Bay ( http://www.ebay.com/itm/Mercruiser-M...5cc86a&vxp=mtr )
that is a bit cheaper (part# 806193A48). Any idea what the differences are?
The A51 is called a DRIVE LUBE MONITOR.
The A48 is called a LUBE BOTTLE KIT.
I also found another one on E-Bay ( http://www.ebay.com/itm/Mercruiser-M...5cc86a&vxp=mtr )
that is a bit cheaper (part# 806193A48). Any idea what the differences are?
The A51 is called a DRIVE LUBE MONITOR.
The A48 is called a LUBE BOTTLE KIT.
#9
Registered
Thread Starter
Just ordered the A48 model. Thx for the confirmation.
1 step closer to being on the water:
1 step closer to being on the water:
#10
Registered
iTrader: (1)
I had the same problem. One of my round bottles leaked so I ordered two new ones and brackets to hang them.
Then I took the old round ones apart and found an O-ring that seals the bottom. The plastic bottle had no cracks.
I bet if I clean and replace the O-ring the bottle would not leak. I also have two round bottles for sale.I
Then I took the old round ones apart and found an O-ring that seals the bottom. The plastic bottle had no cracks.
I bet if I clean and replace the O-ring the bottle would not leak. I also have two round bottles for sale.I