Throttle / Shift Controller - Sea Star or Mercruiser
07-03-2014, 11:07 AM
#1
Registered
Thread Starter
Join Date: Jul 2014
Location: West Creek, NJ
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Throttle / Shift Controller - Sea Star or Mercruiser
New to the Forum, but could use some advice on replacing the throttle / shift controller on my 2000 Chaparral 240SSi Mercruiser Sterndrive (7.4L MPI w/ Bravo 3). The Mercruiser controller currently installed is the obsolete Mercruiser Commander 3000 with outdrive trim & 2nd button to lift the outdrive for trailering.
It looks like I have 2 options:
1) Install the SeaStar CH1752P & keep my existing throttle & shift cables
2) Install the Mercruiser Commander 4000 (8M0030551). Upgrade to MerCruiser Gen II Premium shift and throttle cables (897978aXX)
Any thoughts on these & do I have any other options?
It looks like I have 2 options:
1) Install the SeaStar CH1752P & keep my existing throttle & shift cables
2) Install the Mercruiser Commander 4000 (8M0030551). Upgrade to MerCruiser Gen II Premium shift and throttle cables (897978aXX)
Any thoughts on these & do I have any other options?
07-03-2014, 12:03 PM
#3
Registered
Thread Starter
Join Date: Jul 2014
Location: West Creek, NJ
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Not sure of the exact designation. The cables on the boat are similiar to the Teleflex 600A. Not sure how to attach pics so the link is below: http://www.jamestowndistributors.com...PWqMA49F3w_wcB
