salesdeity

I found this mystery piece of stainless trapped in my port tailpipe. It is oval shaped and approximately 3.25" X 2.5". Heavily corroded too. It's not out of the tailpipe - way too small. I don't think it would be out of the CMI headers. My best guess it was part of the stainless intermediate y-pipe (non-switchable) that allows the exhaust to go out either straight out or through the bravo transom assembly below the waterline. The vertical part of the y-pipe does have this same oval shape. Anyone ever seen this? Should I be concerned? Thanks.


http://s1373.photobucket.com/user/sa...88925915709365

http://s1373.photobucket.com/user/sa...88925915709365

http://s1373.photobucket.com/user/sa...57681790296686

Wobble

I think it could be part of the wire mesh inside the rubber exhaust hose. has it ever lost an impeller and gotten hot?

jeff32

my guess too!

1 MAIDEN AMERICA

Look inside the tail. There's a short, inner, tube where the water enters that works like a baffle to keep the water going in the right direction.