kennyo

Are gen 6 HP500 covers taller than the stock 502mpi covers???

mickeymcclgn

iTrader: (1)

Nope, I believe they're the same cover as the 502mpi except the 500s have expensive blue paint and a really expensive shiny stainless piece with a sticker on it lol.

F-2 Speedy

iTrader: (6)

yup, black =50 bucks blue =200

ezstriper

some of them had some grinding done on the underside to clear the crane rockers...

F-2 Speedy

iTrader: (6)

I've never seen any valve cover's that have been ground on, but two of the rockers have the corners radiused to clear the hold down boss

airjunky

iTrader: (2)

The early blue covers are the silly money , went where mainly stamped covers had dare to go before ,and had to clear those glorious gold rockers lol .then add the stainless sticker on top and you know you have spent some bucks

Griff

They are the same valve covers. The black engines have oil drip tabs on the underside. The tabs are ground off on blue engines to clear the roller rocker arms.

kennyo

That's what I thought.... I have a set that won't clear roller rockers with the long studs....Must be different studs from factory.

Baja226sport

iTrader: (28)

Agreed! As a matter of fact I installed a set 3 summers ago not thinking of the oil drippers. First rotation the rockers hit them and broke them off. I had to open up the new engine and clean the metal out.

airjunky

iTrader: (2)

Damn I forgot about the ribs under the covers on the gen 5&6 too .