Rubberized spray flooring?
#12
Registered
Thread Starter
#16
Registered
Thread Starter
I think when you get the floor done on your boat, you should leave all the seats out. then we can take it out and wear roller blades at the same time!!
#18
Platinum Member
Platinum Member
We re-sprayed the floor of the Scarab with gel coat with an abrasive adder (sand?). We had removed all the existing floor mounted seating and had too many patches and textures. It came out great, someone like GlassDave could do this. All we do is vacuum and wipe with a wet towel or annually wash the floor with a scrub brush.