Quick Rinda mercruiser question 555 adaptor
#1
Registered
Thread Starter
Quick Rinda mercruiser question 555 adaptor
I only have the mefi1-4 (10 pin) adaptor for my Rinda scan tool. I want to be able to also read a 555 computer (496 HO).
A buddy's Engine is acting up once a day. Just 1 beep then the port engine cuts out for 1/2 second when running over 3500-4000 rpms. All gauges read fine and performance is fine.
Do I just need the 94006 adaptor or do I also have to upgrade my software?
Thank you in advance.
A buddy's Engine is acting up once a day. Just 1 beep then the port engine cuts out for 1/2 second when running over 3500-4000 rpms. All gauges read fine and performance is fine.
Do I just need the 94006 adaptor or do I also have to upgrade my software?
Thank you in advance.
#2
Roughly how old is your scan tool? You may have to call Rinda direct as they have good phone support.
http://www.rinda.com/company.htm
http://www.rinda.com/company.htm
#3
Registered
Thread Starter
It is older not sure of the exact year, but I would guess 10 years?
#5
Registered
Thread Starter
Ill give them a call tomorrow. 2003 model i think at least that is what it says on the start up screen along with version 4.03.
#7
Registered
Thread Starter
http://www.boatfix.com/merc/Bullet/01/01_01.pdf
This bulletin replaces bulletins 96-9 and 93-23. Destroy these older bulletins.
MerCruiser Scan Tool
Version 4.0
This hand held Scan Tool has been updated for 2001. It can be used on all gasoline MCM/
MIE engines equipped with either the Delco MEFI ECM or the new Mercury PCM 555
Looks like I just need the 94006 adaptor
This bulletin replaces bulletins 96-9 and 93-23. Destroy these older bulletins.
MerCruiser Scan Tool
Version 4.0
This hand held Scan Tool has been updated for 2001. It can be used on all gasoline MCM/
MIE engines equipped with either the Delco MEFI ECM or the new Mercury PCM 555
Looks like I just need the 94006 adaptor