454 making 525-550hp
#31
Registered
iTrader: (4)
Hey guys,
I'm new to the forum and this is my first post. I cant seem to start my own discussion but This one seems somewhat comparable to what I'm doing. I have a 1989 Formula 242 LS. The boat originally had the 454 magnum (365) with GIL exhaust on it. I pulled the motor this season and had it completely rebuilt. I threw a Cam in it, punched it out 30 ,,new DART heads, bigger carb ,new exhaust ,,the whole deal. It came off the dyno making 526HP with 558 ft/lb of torque.
My question for anyone out there is what I should be looking at for a prop. I had a 21 pitch Mirage plus with the original block and it ran perfect...58 mph-61mph on a good day. My motor at peak performance now turns at 5300 RPM. I have plans to change my prop but I'm wondering if a 23 mirage plus 3 blade may be a bit small. Should I be looking at a 25 pitch Mirage plus?
I'm told these old formulas like the 3 blades, but any information would be helpful.
Thanks
I'm new to the forum and this is my first post. I cant seem to start my own discussion but This one seems somewhat comparable to what I'm doing. I have a 1989 Formula 242 LS. The boat originally had the 454 magnum (365) with GIL exhaust on it. I pulled the motor this season and had it completely rebuilt. I threw a Cam in it, punched it out 30 ,,new DART heads, bigger carb ,new exhaust ,,the whole deal. It came off the dyno making 526HP with 558 ft/lb of torque.
My question for anyone out there is what I should be looking at for a prop. I had a 21 pitch Mirage plus with the original block and it ran perfect...58 mph-61mph on a good day. My motor at peak performance now turns at 5300 RPM. I have plans to change my prop but I'm wondering if a 23 mirage plus 3 blade may be a bit small. Should I be looking at a 25 pitch Mirage plus?
I'm told these old formulas like the 3 blades, but any information would be helpful.
Thanks
#34
Registered
Your finished project looks great. Trusting that the power levels are what you are looking for. This would have been an interesting project using this as your platform.
http://www.crateenginedepot.com/LSX4...33-P50880.aspx
http://www.crateenginedepot.com/LSX4...33-P50880.aspx