Engine alarm Help
10-16-2015, 08:06 AM
#1
Registered
Thread Starter
Join Date: Jan 2009
Location: Tampa Bay, Florida
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Engine alarm Help
02 Baja 25, Outlaw---brand new 502 engine---engine alarm sending units all brand new---engine alarm rings so to find out what sending unit it was, I pulled the wires off all ---- the sending units one at a time---and the alarm still rings???? All 3 sending units are disconnected ---water temp-oil pressure--and drive fluid bottle----How is the alarm still ringing---could the alarm itself be no good--it is original !!!! Thanks---Mike-Tampa Bay
10-16-2015, 08:33 AM
#2
Platinum Member
Platinum Member
iTrader: (6)
this is a carb'd engine ?
10-16-2015, 09:57 AM
#4
Platinum Member
Platinum Member
iTrader: (6)
what is the cadence of the beep, solid tone, interrupted ?? two shorts and a long lol
10-16-2015, 10:04 AM
#5
Registered
Thread Starter
Join Date: Jan 2009
Location: Tampa Bay, Florida
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
hmmmn--solid ringing!!!! ????? would it matter w/ all the sending units un-plugged OR do you think I had to much beer and it was stereo noise hahaha!!!!
VIP Member
10-16-2015, 10:09 AM
#7
Platinum Member
Platinum Member
iTrader: (6)
if you have solid tone unstarted, Im leanin towards the beer, that's normal................you running a knock sensor ?
10-16-2015, 10:12 AM
#8
Registered
Thread Starter
Join Date: Jan 2009
Location: Tampa Bay, Florida
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
When you turn the key on the ringing starts and when the engine starts she goes off-------now stays on (ringing) w/the engine running----oil pressure gauge shows 50 lbs-where she always is and of course the water is cool because the engine was just started......Thanks.......
10-16-2015, 10:21 AM
#10
Platinum Member
Platinum Member
iTrader: (6)
did it ever work correctly with the new engine, we need more specifics ......
