Milling heads for compression
11-26-2015, 10:23 AM
#12
Registered
iTrader: (3)
The race series darts can be milled .070 down to 105cc and be within spec, as they have thicker decks. Mine were milled around that much, and my intakes fit fine.
The 308 Iron eagles, can be milled to 110CC and be within spec.
As cast, they have 121cc chambers.
This is from Dart's literature.
The 308 Iron eagles, can be milled to 110CC and be within spec.
As cast, they have 121cc chambers.
This is from Dart's literature.
