Vortech V4 Supercharger set-up on a GenXI 502
#23
Clean. Thanks for making me hate my boat, lol.
With the crossovers did you tap into the back with pressure valves dumping the excess overboard? I run in some 50-60* water and worry about getting too cold with the cross overs.
I'm also curious what size oil coolers you guys are running with those Vortech motors. I currently have a 2x18" cooler with 3/4" lines. I'm thinking that I may need to go bigger.
With the crossovers did you tap into the back with pressure valves dumping the excess overboard? I run in some 50-60* water and worry about getting too cold with the cross overs.
I'm also curious what size oil coolers you guys are running with those Vortech motors. I currently have a 2x18" cooler with 3/4" lines. I'm thinking that I may need to go bigger.
Last edited by Baja Rooster; 04-07-2016 at 12:03 PM.
#24
Registered
Clean. Thanks for making me hate my boat, lol.
With the crossovers did you tap into the back with pressure valves dumping the excess overboard? I run in some 50-60* water and worry about getting too cold with the cross overs.
I'm also curious what size oil coolers you guys are running with those Vortech motors. I currently have a 2x18" cooler with 3/4" lines. I'm thinking that I may need to go bigger.
With the crossovers did you tap into the back with pressure valves dumping the excess overboard? I run in some 50-60* water and worry about getting too cold with the cross overs.
I'm also curious what size oil coolers you guys are running with those Vortech motors. I currently have a 2x18" cooler with 3/4" lines. I'm thinking that I may need to go bigger.
I had pressure relief valves on it before I put the crossovers on and saw no difference in the pressure on the gauges ,I still run a thermostat in the intake ,my oil coolers are 3x20 and have a thermostatic by-pass in them,