closed cooling system kit 750hp
#1
VIP Member
VIP Member
Thread Starter
closed cooling system kit 750hp
Evening, who is producing a closed cooling system kit for 750hp ish power? I see a lot of 500hp and some 650hp but havent seen much in the way of 700-800hp stuff. Does anyone have a leed for a reputable system? Thanks.
#2
Registered
you just need a large heat exchanger, there is a company in NY Mr Cool I think that sells oversize ones(I bought 2 years ago and still using them ) and you will have to make up the rest, not a big deal, you will have to run a circulating pump if running a crossover now. Its not bad after you mount the exchanger
#3
VIP Member
VIP Member
Thread Starter
you just need a large heat exchanger, there is a company in NY Mr Cool I think that sells oversize ones(I bought 2 years ago and still using them ) and you will have to make up the rest, not a big deal, you will have to run a circulating pump if running a crossover now. Its not bad after you mount the exchanger
#5
Registered
Ayuh,.... Unless ya got a Brand New motor, don't even think about addin' closed coolin' to a used motor, especially if used in the brine,...
#7
__________________
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
#8
VIP Member
VIP Member
Thread Starter
Thanks, I think I roamed onto your site last night. PM sent.
#9
Registered
Join Date: May 2015
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
You could try Savage Manufacturing in NZ. The boat I have came with Savage oil coolers so when it came time for engine coolers I chose to keep everything the same the fella down there seemed to ask all the right questions hp level, ambient ocean temp, how we wanted the inlet and outlets arranged etc you can get horizontal or vertical units depending on your space they are all custom built to suit your engines cooling requirement.
Stainless Steel,chrome played very happy with my set up.
Stainless Steel,chrome played very happy with my set up.
#10
VIP Member
VIP Member
Thread Starter
Hugh, that sounds interesting. New Zealand? Someone asking all the right questions is key for someone not that familiar with how to set up the heat exchangers. Thank you.