Fuel in oil. Port side
#1
Registered
Thread Starter
Join Date: Jul 2014
Location: Clinton ct
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Fuel in oil. Port side
I'm getting gas only in my port side exhaust. The block has 0 hours on it. All of the injectors have been cleaned and serviced. I even changed the computer on that motor. Not sure what to do now. 'My mechanic is stumped also??
#2
Platinum Member
Platinum Member
iTrader: (6)
What engine is it 454 - 502 mag with vst ? the title and content of the thread are two different things, does it run
Last edited by F-2 Speedy; 07-16-2017 at 12:57 PM.
#5
Platinum Member
Platinum Member
iTrader: (6)
and you know this how ??...I'll ask again, does the engine run
#7
Registered
Thread Starter
Join Date: Jul 2014
Location: Clinton ct
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Yes, it runs . On the hose, starboard side exhaust is clean fresh water, port side is full of fuel, its white and beads up on your hand and smells of gas. Also after running 5 min on the hose the oil smells like gas
#8
Platinum Member
Platinum Member
iTrader: (6)
Im not well versed in VST, camp 69 may be onto something, excessive amount of fuel ( flooding ) could wash down the cylinders push it passed the rings and into the pan
#10
Registered
Not sure if to much fuel would make the oil white, think water would do that, check the vst, there is a small black hoes that goes directly to a fitting on the intake that dumps excess fuel.