502 Pro charger with closed cooling
#1
Registered
Thread Starter
Join Date: Apr 2016
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
502 Pro charger with closed cooling
Hi,
i would like to know is there any restrictions to use closed cooling with pro charger setup? I have understand that many setups use crossover so I would like to know is there some restrictions for closed cooling (..like placement of water circ. pump or something like that)???
Does electrical circulation pump have enough flow for marine cooling?
Thanks
i would like to know is there any restrictions to use closed cooling with pro charger setup? I have understand that many setups use crossover so I would like to know is there some restrictions for closed cooling (..like placement of water circ. pump or something like that)???
Does electrical circulation pump have enough flow for marine cooling?
Thanks
Last edited by oopee; 08-31-2017 at 04:42 AM.
#2
Registered
procharged engines like to run very cold so no t-stat, you are going to have to tap in before the heat exchanger to flow water to intercooler, the engine pump should be fine