Question For Dustin Whipple
#1
Gold Member
Gold Member
Thread Starter
Join Date: Oct 2001
Location: Haslet, TX,USA
Posts: 1,936
Likes: 0
Received 0 Likes
on
0 Posts
Question For Dustin Whipple
Can you reprogram my ecu for my 1999 502 mag for headers and a K&N, Your the only one I trust, If so how much?
Thanks, Jason
Thanks, Jason
#3
VIP Member
iTrader: (1)
Dustin--
Can you/do you have the capability to reprogram a MEFI 3 box??
I was looking at a crate motor that has this box and I want to supercharge it later on.
Dave
Can you/do you have the capability to reprogram a MEFI 3 box??
I was looking at a crate motor that has this box and I want to supercharge it later on.
Dave
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
#6
Registered
Join Date: Oct 2000
Location: Fresno, CA, 93722, USA
Posts: 1,436
Likes: 0
Received 4 Likes
on
4 Posts
Bigwavz,
Yes, we just never built a "stock" cal for the 454/502, only supercharged cals. Without passwords, you cannot upload the stock cals that are in there. I have other stock cals that I had passwords for, but not the 454/502MPI's. So no problem calibrating a crate engine.
For the 496, we have quite a few different cals, but we've done the leg work for you and tell you which exhaust to get and have a calibration for that, no guesswork. It's a kit, low temp stat, filter, cal, etc.
Hotrodtodd32, email me at [email protected] and I'll send you a list, but theres not that many in the BC area.
Thanks
Dustin
Yes, we just never built a "stock" cal for the 454/502, only supercharged cals. Without passwords, you cannot upload the stock cals that are in there. I have other stock cals that I had passwords for, but not the 454/502MPI's. So no problem calibrating a crate engine.
For the 496, we have quite a few different cals, but we've done the leg work for you and tell you which exhaust to get and have a calibration for that, no guesswork. It's a kit, low temp stat, filter, cal, etc.
Hotrodtodd32, email me at [email protected] and I'll send you a list, but theres not that many in the BC area.
Thanks
Dustin
#7
Registered
Join Date: Apr 2002
Location: Valparaiso, Indiana
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
Dlustin Whipple
Do you still have the Hemi Eliminator and is it for sale ? If not do you know who has it and is it for sale?
Les / [email protected]
Les / [email protected]
#9
Charter Member #1171
Charter Member
Factory tune should be fat enough to run with headers and K and N
__________________
I want to live in a world where a chicken can cross the road and not have its motives questioned.
I want to live in a world where a chicken can cross the road and not have its motives questioned.