JE Pistons compare to SRP (75F)Pistons
#1
Registered
Thread Starter
Join Date: Feb 2001
Location: Norway (Ft Lauderdale)
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
JE Pistons compare to SRP (75F)Pistons
Got my 502 Gen 6 back from the workshop bored
0,30,the shop told me they have used JE pistons,
but inside the pistons it says SRP 75F.I need some
help here,what is the SRP 75F pistons? I`m not
familiar with that brand. Are they accepted for
use in a HP 500 EFI ? With a Procharger ? Thanks
502 Magnum
0,30,the shop told me they have used JE pistons,
but inside the pistons it says SRP 75F.I need some
help here,what is the SRP 75F pistons? I`m not
familiar with that brand. Are they accepted for
use in a HP 500 EFI ? With a Procharger ? Thanks
502 Magnum
#3
Guest
Posts: n/a
SRP is the "economy" branch of JE. They are a very good piston, but are mass produced instead of on the JE line and are not quite as good material. They probably will live in your motor if you don't make too much boost. Price is considerably less than JE so I would see what I was charged and if you said "JE pistons", I would need to have a talk.
#4
Registered
Thread Starter
Join Date: Feb 2001
Location: Norway (Ft Lauderdale)
Posts: 168
Likes: 0
Received 0 Likes
on
0 Posts
JE pistons compare to SRP (75F) Pistons
Thanks for reply and the suport I feel here Guys,
blown1500, I think you`r right ,and if I`v told you
the price this well accepted workshop Gent in
Ft.Lauderdale took to do my shortblock,
I`m shure you will cry out . Ok,I`ll give the man
a call before I `ll go any further here.
502 Magnum
blown1500, I think you`r right ,and if I`v told you
the price this well accepted workshop Gent in
Ft.Lauderdale took to do my shortblock,
I`m shure you will cry out . Ok,I`ll give the man
a call before I `ll go any further here.
502 Magnum