Polyester gelcoat on epoxy
09-15-2003, 01:00 AM
#1
Registered
Thread Starter
Join Date: Feb 2001
Location: Abita Springs, La.
Posts: 513
Likes: 0
Received 0 Likes
on
0 Posts
Polyester gelcoat on epoxy
Fiberglass experts-
My hull is epoxy/kevlar and I read that there is an adhesion problem with polyester on epoxy resin. Is this true with polyester gelcoat on epoxy???? I pressure washed the fuel tank bays and was able to dislodge about 25 percent of the gelcoat with ease.
Also, what brand/type is the best gelcoat to use? The hull is white with a layer of black underneath.
Thanks
Ronnie aka Bulldog
My hull is epoxy/kevlar and I read that there is an adhesion problem with polyester on epoxy resin. Is this true with polyester gelcoat on epoxy???? I pressure washed the fuel tank bays and was able to dislodge about 25 percent of the gelcoat with ease.
Also, what brand/type is the best gelcoat to use? The hull is white with a layer of black underneath.
Thanks
Ronnie aka Bulldog
Thread
Thread Starter
Forum
Replies
Last Post
BraceYourself
General Boating Discussion
2
05-21-2008 06:53 PM
