Help Bravo Drive Stand?
#1
Registered
Thread Starter
Join Date: Jun 2003
Location: Newport Beach / California
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
Help Bravo Drive Stand?
Anyone make a stand to hold your drives while off of the boat, the cement and walls are taking a beating and the drives are unhappy.
Post dimensions if you can, the drives and boat are not close so I can not take measurements my self.
I would like to build them and transport them to the drives. So what ever you guys post is what i will build.
Thanks.
Post dimensions if you can, the drives and boat are not close so I can not take measurements my self.
I would like to build them and transport them to the drives. So what ever you guys post is what i will build.
Thanks.
#2
Charter Member #655
Charter Member
I've seen them made out of 2X10's but dont know the demensions....sorry I'd like to made some too.
__________________
If your boat has a sail do you ride a horse to the ramp?
If your boat has a sail do you ride a horse to the ramp?
#3
Registered
Join Date: Oct 2000
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
#4
Registered
Join Date: Aug 2001
Location: Gainesville Fl.
Posts: 573
Likes: 0
Received 0 Likes
on
0 Posts
Just called the manufacture of the one on ebay and we can get a 5% discount on 5 and 10% on 10 if we had a group buy.I will need one soon so if all else fails I am buying one from them .Shipping was included in the price.
Last edited by FloridianSon; 09-15-2003 at 05:42 PM.
#8
Registered
Go down get an engine stand, 49.95. take a drive and stand to a weld shop and have them weld 2 bars onto the engine stand head. less than 75.00 and it will also rotate to work on the lower while standing.
#10
Originally posted by Hard On
Go down get an engine stand, 49.95. take a drive and stand to a weld shop and have them weld 2 bars onto the engine stand head. less than 75.00 and it will also rotate to work on the lower while standing.
Go down get an engine stand, 49.95. take a drive and stand to a weld shop and have them weld 2 bars onto the engine stand head. less than 75.00 and it will also rotate to work on the lower while standing.
Last edited by US1 Fountain; 12-02-2011 at 11:17 AM.