Stainless Marine Hi-Torque III
#1
Registered
Thread Starter
Join Date: Feb 2001
Location: Portage,IN
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
Stainless Marine Hi-Torque III
I've beeen thinking about replacing my existing
exhaust with a set of SM Hi-Torque III manifolds and risers on my 502.
My present setup is close to 600HP with an upgrade
in the foreseeable future.......
I've had the Hi-Torgue manifolds on a set of 454's and was VERY pleased with them.
Any comments on the Hi- Torque III ??
OH yeah,
Who has the best price on SM?
exhaust with a set of SM Hi-Torque III manifolds and risers on my 502.
My present setup is close to 600HP with an upgrade
in the foreseeable future.......
I've had the Hi-Torgue manifolds on a set of 454's and was VERY pleased with them.
Any comments on the Hi- Torque III ??
OH yeah,
Who has the best price on SM?
#3
Registered
Join Date: Nov 2000
Location: NW , IN USA
Posts: 1,073
Likes: 0
Received 0 Likes
on
0 Posts
Dennis I think either Mike at Doller or Tommy at Chief had some Dyno sheets on them. The difference between them and a full double tube header, there is really very little difference. I had seen Mega Toy with triples running them as well. I just had to stay with the big tubes !!
I think we all ready went over that though.
I will have to check my notes on the $$$$.
I think we all ready went over that though.
I will have to check my notes on the $$$$.
#4
Guest
Posts: n/a
I have a pair of Hi-Torque III manifolds on a near-stock 454. I know this is overkill, but I got them REALLY cheap!
Remember, there are 3 different models of this manifold. The difference is the size of the collector/outlet. 4", 4.5" and 5" are the choices.
I bought mine here on the classifieds. They had 5 hours of Dyno run time on them. I got them for 1/5 the cost of new ones!
Remember, there are 3 different models of this manifold. The difference is the size of the collector/outlet. 4", 4.5" and 5" are the choices.
I bought mine here on the classifieds. They had 5 hours of Dyno run time on them. I got them for 1/5 the cost of new ones!
Thread
Thread Starter
Forum
Replies
Last Post
Sick Stinger
General Boating Discussion
26
08-23-2008 07:15 AM