shawn

I bought a pair of old merc pumps which have a "weird" three prong plug-in on them, like two vertical and one horizontal. Where would I get a male plug to use on these?

thanks
Shawn

marinetrans

What we do is hard wire the trim harness to trim motor. The 3 prong plug sometimes gets corroded or sometimes they wiggle lose. Just follow your color codes. Fuse the red wire going to the trim switch. You can make up your own harness to with red, green and blue wire.

shawn

Marinetrans, thanks for the input. I was going to do that as a last resort, but did not think about the connector coming loose. Hard wire is the answer and its cheaper.
Shawn