Acclerator Prop Delivers
#11
Re: 27 left mirage plus 99.00 e/bay
Originally posted by HOUSTONPROP
there is a 27 Mirage plus on there right now with 11 hours left for 99.00 no current bids and the time is
44 central time ,
YOU BETTER HURRY !!!!!!!!!!!!!!!!!!!!!!!!!!!!!
YOU BETTER HURRY!!!!!!!!!!!!!!!!!!!!
27 LEFT mirage pluus on e-bay 99.00 hurry hurry!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
there is a 27 Mirage plus on there right now with 11 hours left for 99.00 no current bids and the time is
44 central time ,
YOU BETTER HURRY !!!!!!!!!!!!!!!!!!!!!!!!!!!!!
YOU BETTER HURRY!!!!!!!!!!!!!!!!!!!!
27 LEFT mirage pluus on e-bay 99.00 hurry hurry!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
One question and maybe a dumb one at that. Being that all props are different should I run this 27 mirage plus to get some base line numbers before we look at reworking it. Probably January or February before I can get that opportunity.
#13
Registered
Join Date: Nov 2003
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the reply. Sorry about the misunderstanding regarding the remark "do you buy fast props, and install rings to slow back down" I was referring to me and the others that have changed props, only to later have to install these "rings". and then be back where we started. Also I stand corrected, the boat had Bravo props, (not labbed) not Mirage's. If you were to rework the Hydro's, you indicate the "blowout" would be improved, however would there be a loss of top spreed? I realize there are no guarantee's, obliviously your word and best intentions are just as valuable.
Thanks
Thanks
#14
Registered
Thread Starter
Join Date: Jul 2002
Location: Houston,texas
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
Cig 30
no problem,as far as loss of speed ????
the honest answer is I do not know for sure .
it could run faster,may run slower?
but would surley plane out quick ,with little blowout,
I am pretty sure what needs to be done in my mind what to do to make them plane quick and keep the rpm and speed up.(Thats the GOAL.)
if not we can always put them back where they were,and try something else,you only pay -once at my shop. we will get it, until we hit the mark.
what pitch B-1s did you have ?
the honest answer is I do not know for sure .
it could run faster,may run slower?
but would surley plane out quick ,with little blowout,
I am pretty sure what needs to be done in my mind what to do to make them plane quick and keep the rpm and speed up.(Thats the GOAL.)
if not we can always put them back where they were,and try something else,you only pay -once at my shop. we will get it, until we hit the mark.
what pitch B-1s did you have ?
Last edited by HOUSTONPROP; 12-10-2003 at 10:50 PM.
#15
Registered
Join Date: Nov 2003
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Man, would it be awesome if Cigarette was half as responsive as you guys (Houston Props). The B-1s were 30's. Can't ask anymore than you have offered. Will get the props off the boat (stored) and contact you direct.
Many thanks, what a pleasure!
Many thanks, what a pleasure!
#17
Registered
Thread Starter
Join Date: Jul 2002
Location: Houston,texas
Posts: 1,387
Likes: 0
Received 0 Likes
on
0 Posts
IronMan
it just depends on what you need ??
more or less can be achieved ,but there is a maximum of 600rpm's each way.send me a pm and let me know what you are running ,where you are at for rpms and speed and what would you would like to achieve.
Darin/ talk to you tomorrow
more or less can be achieved ,but there is a maximum of 600rpm's each way.send me a pm and let me know what you are running ,where you are at for rpms and speed and what would you would like to achieve.
Darin/ talk to you tomorrow
#20
Gone Fishin'
Charter Member
Join Date: Nov 2000
Location: Grand Rapids/Holland/Grand Haven
Posts: 7,408
Likes: 0
Received 0 Likes
on
0 Posts
Darin
can you make accellerators out of Quicksilvers (25")
or would they be "trade ins"
i have stock 330's on a formula 272. 4500-4600
64mph top speed/
I want same wot rpm, same cruise (40mph at 3000rpm) but top end gain
is this the prop for this, or labbing and cupping my quicksilvers, or start over with something more modern
thanks
ramb
can you make accellerators out of Quicksilvers (25")
or would they be "trade ins"
i have stock 330's on a formula 272. 4500-4600
64mph top speed/
I want same wot rpm, same cruise (40mph at 3000rpm) but top end gain
is this the prop for this, or labbing and cupping my quicksilvers, or start over with something more modern
thanks
ramb
__________________
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!