Single Engine 33 Footer
#1
Registered
Thread Starter
Join Date: Nov 2003
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Single Engine 33 Footer
What do you guys think about an '88 Fountain 10 meter with a single 1200hp engine? I know docking would be compromised but what about top end and handling. Speed ?
Merc #6 or Arneson? ... I've heard Fountains run level, so the Arneson might push the bow down a bit much, anyone ever use those Arneson rocker plates on a big V hull with no steps? Let me hear what you think about this... I have the boat and I have a 1200 hp turbine engine I want to install in her, but I don't want to build something that will only do 75 mph... Anyone know the weight of that hull?
Thanks ,Eric
Merc #6 or Arneson? ... I've heard Fountains run level, so the Arneson might push the bow down a bit much, anyone ever use those Arneson rocker plates on a big V hull with no steps? Let me hear what you think about this... I have the boat and I have a 1200 hp turbine engine I want to install in her, but I don't want to build something that will only do 75 mph... Anyone know the weight of that hull?
Thanks ,Eric
#2
Charter Member
Charter Member
Join Date: Mar 2001
Location: Longview, Wa 98632
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
About 15 yrs ago, Arneson had a 32-36' with a T55
turbine and it did about double that. Don't know the hull make but it only had 2 seats controls engine and fuel
tanks.
Sounds like you will have a cool project, plus you can roast hotdogs on the fly.
turbine and it did about double that. Don't know the hull make but it only had 2 seats controls engine and fuel
tanks.
Sounds like you will have a cool project, plus you can roast hotdogs on the fly.
#3
Platinum Member
Platinum Member
Originally posted by Geo 100
...a T55 turbine and it did about double that. ...it only had 2 seats controls engine and fuel tanks.
...a T55 turbine and it did about double that. ...it only had 2 seats controls engine and fuel tanks.
#4
Somewhere I remember seeing an article about a boat Arneson put together with a single just like that with a shaft drive. Did over 200 mph. Dont know what ever happened with that project.
#5
Registered
Join Date: Jan 2001
Location: ST. Louis, MO, USA
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
There was a british company (Liberty Turbine) that rigged a boat that size with a T55? connected to a splitterbox and 2 Bravo drives. How about that for an option?
Gary
Gary
#6
Charter Member
Charter Member
Join Date: Mar 2001
Location: Longview, Wa 98632
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
There was a test race on the Colombia river to see what
the waters were like. About 30 boats showed, one being
Arneson's. When the race was started they went up river 25 miles and back. If i remember right it the Arneson boat was gone for 22 min. and the next boat to arrive was 30 min later.
the waters were like. About 30 boats showed, one being
Arneson's. When the race was started they went up river 25 miles and back. If i remember right it the Arneson boat was gone for 22 min. and the next boat to arrive was 30 min later.
#7
Official OSO boat whore
Charter Member
iTrader: (2)
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
Arneson would be an excellent candidate to answer your questions. They've done several turbine boats in the past. Also consider talking to Fountain. I'd be interested in the change of cg.
#9
speel chekk this fokker!
Charter Member
Join Date: Feb 2001
Location: Locust Valley, New York
Posts: 5,329
Likes: 0
Received 0 Likes
on
0 Posts
well superboat makes a 30' with a single engine and drive. But its much narrower than a fountain.
__________________
Pardon me, while I whip this out!
Pardon me, while I whip this out!
#10
Registered
Join Date: Jul 2001
Location: Potomac River/ Smith Mtn. Lake
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
There are a handfull of single engine 32 Sunsations ou there. My good friend has a 2003 500efi with ITS box that does 72 to 75 and he is adding a 3.3 Whipple this winter which should see high 80s. With 1200 HP turbine you have the power. I just dont know about the best drive to most efficiently make use of it.