johnnyboatman

iTrader: (5)

justgot new 850 sea demon carbs, should i bolt them on and check for correct jetting or should i send them to dean nickerson for calibration{ what is calibration } the motors are roller 502s not radical just strong. smooth to lite choppy idle. has any one used sea demons did you like them.

johnnyboatman

iTrader: (5)

t.t.t

Crazyhorse

Fred has them on his boat. He seems to like them. What jets are in them now?

johnnyboatman

iTrader: (5)

crazyhorse
there new in the box havent looked yet. did fred have to change the jets in his.

fred

My Demons are 750 double pumpers on stock bore 454/400hp Cyclone's with Edelbrock Air Gap intakes different cams...stock type exhaust, they are un-touched as they came carbs. they work fine and I haven't had to touch them, Fred

Griff

Bolt them on and check the plugs at various rpms when you run the boat. They should be jetted in the ball park for a good starting point.