Latham Marine info needed
#1
Registered
Thread Starter
Join Date: May 2002
Location: Cumming GA
Posts: 931
Likes: 0
Received 0 Likes
on
0 Posts
Latham Marine info needed
I am looking for some parts to complete a full hyd steering setup. I have called Latham several times over the past couple of months to request a catalog with no success. So I hope that somebody here may be able to help. Does anyone have a parts list for the twin external components and a parts list for the full hyd system? Or, does anyone know how to get a catalog?
Thanks, Todd
Thanks, Todd
#3
Registered
Thread Starter
Join Date: May 2002
Location: Cumming GA
Posts: 931
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, but I believe that some of the parts that I need are going to be specific to the Latham system. The parts were removed from another boat and some of the mounting hardware is missing. The main thing that I need for the external system are the bolts that mount the rams to the drive caps. Also need the bulkhead fittings to connect the external lines to the internal system.
Todd
Todd
Thread
Thread Starter
Forum
Replies
Last Post
KennyOffShore
Offshoreonly Industry News
0
08-14-2008 12:18 PM